Filter
Top Products
2-232-23
2-232-23
2-23
ASUS T2-AH1ASUS T2-AH1
ASUS T2-AH1ASUS T2-AH1
ASUS T2-AH1
To install a Serial ATA hard disk drive:
1. Follow steps 1-7 of the previous section.
2. Connect one end of the supplied
7-pin SATA cable (right angle
side) to the SATA connector at
the back of the drive, then
connect the other end to a
SATA connector on the
motherboard. See page 4-8 for
the location of the Serial ATA
connectors.
22
22
2
22
22
2
3a3a
3a3a
3a
33
33
3
bb
bb
b
15-pin SATA15-pin SATA
15-pin SATA15-pin SATA
15-pin SATA
power plugpower plug
power plugpower plug
power plug
4-pin (male)4-pin (male)
4-pin (male)4-pin (male)
4-pin (male)
power plugpower plug
power plugpower plug
power plug
If your Serial ATA HDD has both 4-pin and 15-pin connectors at the
back, use either the 15-pin SATA power adapter plug
OROR
OROR
O R the legacy
4-pin power connector.
DO NOTDO NOT
DO NOTDO NOT
D O N O T use both to prevent damage to
components and to keep the system from becoming unstable.
3. For Serial ATA HDDs with a
4
-
pin power connector:
a. Connect a 4-pin (female) power plug from the power supply unit
to the 4-pin (male) power connector at the back of the drive. See
page 2-25 for details on the power supply unit plugs.
For Serial ATA HDDs without a 4
-
pin power connector:
b. Connect the 15-pin SATA power adapter plug to the power
connector at the back of the drive, then connect the other end
(4-pin male) to a 4-pin (female) power plug from the power
supply unit. See page 2-25 for details on the power supply unit
plugs.