Filter
Top Products
2-92-9
2-92-9
2-9
ASUS T2-AH1ASUS T2-AH1
ASUS T2-AH1ASUS T2-AH1
ASUS T2-AH1
2.6 Installing a DIMM
The system motherboard comes with two Double Data Rate (DDR) Dual
Inline Memory Module (DIMM) sockets.
The following figure illustrates the location of the sockets:
• Installing DDR DIMMS other than the recommended configurations
may cause memory sizing error or system boot failure. Use any of
the recommended configurations in the table on the next page.
• Install only
identical identical
identical identical
identical (the same type and size) DDR DIMM in
DIMM_A1 and DIMM_B1.
• If installing only one DDR DIMM, install it in DIMM_A1 (blue slot).
• Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from
the same vendor.
• Due to chipset resource allocation, the system may detect less than
your total system memory size when you enable the onboard VGA.
• This motherboard does not support memory modules made up of
128 Mb chips or double-sided x16 memory modules.
2.6.12.6.1
2.6.12.6.1
2.6.1
Memory configurationsMemory configurations
Memory configurationsMemory configurations
Memory configurations
You may install up to 2 GB system memory using 256 MB, 512 MB, and
1 GB DDR DIMMs.
®
184-pin DDR DIMM sockets
80 Pins 104 Pins
DIMM_B1
DIMM_A1