Filter
Top Products
5-40 Chapter 5: BIOS information
SETUP prompt [Enabled]
When this item is set to Enabled, the system displays the message “Press
DEL to run Setup” during POST. Conguration options: [Disabled] [Enabled]
Interrupt 19 Capture [Enabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Conguration options: [Disabled] [Enabled]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
→←
Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specic Help
Save any changes to CMOS,
exit BIOS Setup then reboot
system.
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Setup Defaults
5.8 Exit menu
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit
Save Changes and Exit
Select this option then press <Enter>, or simply press <F10>, to save your
changes to CMOS before exiting the Setup utility.
When a conrmation window appears:
• select [Yes], then press <Enter> to save and exit.
• select [No], then press <Enter>, or simply press <Esc>, to cancel the
command and return to the Exit menu.
Discard Changes and Exit
Select this option then press <Enter> if you wish to exit the Setup utility
without saving your changes.
When a conrmation window appears:
• select [Yes], then press <Enter> to discard your changes and exit.
• select [No], then press <Enter>, or simply press <Esc>, to cancel the
command and return to the Exit menu.