Filter
Top Products
6-18 Chapter 6: RAID conguration
6.2.4 Initializing the logical drives
After creating the RAID set(s), you must initialize the logical drives. You
may initialize the logical drives of a RAID set(s) using the Initialize or
Objects command on the Management Menu.
Using the Initialize command
To initialize the logical drive using the Initialize command:
1. From the Management Menu, highlight Initialize, then press <Enter>.
2. The screen displays the available RAID set(s) and prompts you to select
the logical drive to initialize. Use the arrow keys to select the logical
drive from the Logical Drive selection, then press <Enter>.