Filter
Top Products
Chapter 2: Hardware setup2-16
2.6 5.25-inch drives
Three 5.25-inch drive bays are located
on the upper front part of the chassis.
An optical drive that comes standard
with the system package occupies the
uppermost bay (labeled 1). The two
lower bays (labeled 2 and 3) are avail-
able for additional 5.25-inch devices.
If you have previously used and powered up the system, and that it may
be connected to an AC power source, make sure to unplug the power
cable before installing or removing any system components. Failure to
do so may cause damage to the motherboard and other system compo-
nents!
To install a 5.25-inch drive:
1. Use a Phillips (cross) screwdriver
to remove the screws that secure
the metal cover of the bay where
you want to install the drive.
2. Insert the optical drive into the
5.25-inch drive bay.
1
2
3