Filter
Top Products
4-12 Chapter 4: Motherboard information
6. Serial port connector (10-1 pin COM2)
This connector is for a serial (COM) port. Connect the serial port
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The serial port module is purchased separately.
5. USB connector (10-1 pin USB34)
This connector is for USB 2.0 ports. Connect the USB cable to this
connector and another USB connector on the front I/O board. This
USB connector complies with USB 2.0 specication that supports up
to 480 Mbps connection speed.
DSBV-D
DSBV-D USB connector
USB34
Power
1
USB PortA(-)
USB PortA(+)
GND
Power
USB PortB(-)
USB PortB(+)
GND
NC
DSBV-D
DSBV-D Serial port connectors
PIN 1
COM2