SN0108 / SN0116 User Manual
8
Rack Mounting
The SN0108 / SN0116 can be mounted in a 1U system rack. The mounting
brackets can screw into either the front or the back of the unit so that it can
attach to the front or the back of the rack. To rack mount the unit:
1. Remove the screws at the front or the rear, as shown in the diagram below.
2. Screw the mounting brackets into the sides of the unit at the front or the
rear, as shown in the diagram below.
3. Slide the unit into the front or rear of the rack and secure it to the rack.
Phillips head hex
M3 x 6
Phillips head hex
M3 x 6
Phillips head hex
M3 x 8
Phillips head he
x
M3 x 8
sn816_Book-v2.book Page 8 Thursday, July 6, 2006 5:41 PM