Filter
Top Products
Chapter 6. Out of Band Operation
49
4. For the Connect using: field, select Direct to COM1 (assuming you are
using COM1 on your PC), then click OK. A Port Setting dialog box
similar to the one below comes up:
5. For OOBC connections, the SN0108 / SN0116's serial port settings and
the computer's COM port settings must be the same. Change the settings in
your dialog box (if necessary), so that they match the SN0108 / SN0116's
Console Port settings (see Port Config, page 26, for details), then click
OK.
Note: The SN0108 / SN0116's default settings are 9600 bps; 8 Data bits;
No Parity; No Stop bits, but you can change these to something more
suitable to your installation as long as they both match.
sn816_Book-v2.book Page 49 Thursday, July 6, 2006 5:41 PM