Filter
Top Products
SN0108 / SN0116 User Manual
62
SSH
Terminal Session (Linux):
1. Open a terminal (command line) on your computer.
2. At the prompt, key in your SN0108 / SN0116 Username and the SN0108 /
SN0116's IP Address in the following way:
SSH [username@IP Address]
Note: The default SSH port is 22. If that port is already being used, up to
16 additional users can log in by adding a port number (from 5100
to 5115) to the login command. For example:
SSH [username@IP Address] -P 5101
3. Press Enter
4. When you are prompted for a password, use your SN0108 / SN0116
password.
Once an SSH connection to the device is established, the SN0108 /
SN0116 Main Menu comes up:
This menu is the same as the main menu that appears with Telnet sessions (see
p. 41 for Telnet operation).
sn816_Book-v2.book Page 62 Thursday, July 6, 2006 5:41 PM