Filter
Top Products
Chapter 6. Out of Band Operation
55
PPP (Dial In) Connection
This type of connection works directly through the COM port.
Direct PPP Connection
Setup:
To set up a direct PPP connection, do the following:
1. Use Ethernet cable a DTE-to-DTE adapter to connect one of the SN0108 /
SN0116's serial ports to a COM port on a PC (refer back to the PC
Installation section, page 9, if necessary).
Note: 1. See RJ-45 to Serial Adapters, page 78, for details on choosing the
appropriate adapter. The usual choice for connecting to a PC is
SA0141.
2. In the examples that follow we use COM1. If you use a different
COM port, change the settings accordingly.
2. On your PC, run the Make New Connection setup program:
Start → Programs → Accessories → Communications →
Make New Connection
The following dialog box appears:
3. Key a descriptive name for the connection in the top text box; select
Standard 28800 bps Modem for the device; then click Configure.
sn816_Book-v2.book Page 55 Thursday, July 6, 2006 5:41 PM