Filter
Top Products
Appendix
77
Method 3:
A fixed IP address can also be assigned with the ARP command as follows:
1. Turn off the power to the SN0108 / SN0106.
2. Enter the following command:
arp -s <ip address> <SN0108 / SN0106's MAC address>
Where the IP address that you assign is one suitable for the network
segment that the SN0108 / SN0106 resides on.
Note: The SN0108 / SN0106's MAC address can be found on its bottom
panel.
3. Turn the power to the SN0108 / SN0106 back on.
4. In your browser, go to the IP address you just assigned and log in with
your Username and Password.
Note: You must log in within 30 seconds after entering the arp command.
Therefore, it would be advisable to have your browser all set up to
go to the IP address beforehand.
5. Once you have logged in, go to Network, to set up the permanent IP
environment (see page 17).
sn816_Book-v2.book Page 77 Thursday, July 6, 2006 5:41 PM