Filter
Top Products
DNM-UNIX Release 4.0 Installation and Getting Started
5 Getting Started
Description of Commands
December 2001
Page 126
Start Connection This command instructs the Proxy Agent to start a connection to a
DEFINITY, MCU, or SRP.
The NMSI sets the connection state to init (initiating), which
signals the Proxy Agent to connect to the managed node. The
NMSI also changes the color of the connection line to the
init
color to indicate the current status.
Stop Connection This command drops the connection between a Proxy Agent and a
DEFINITY, MCU, or SRP.
The NMSI sets the connection state to off, which signals the Proxy
Agent to drop the connection. The NMSI changes the color of the
connection line to warning or unknown.
When the Proxy Agent drops the connection, NMSI again changes
the color of the connection line to off.
Telnet to Proxy
Agent
This command displays the telnet window to the Proxy Agent.
From the telnet window, users can log in to the Proxy Agent and
initiate an emulation session to cut-through to the managed node.
Table 15. NMS Map commands
Command Description
(4 of 6)