Filter
Top Products
DNM-UNIX Release 4.0 Installation and Getting Started
5 Getting Started
Stand-Alone Access to DNM
December 2001
Page 134
3 Type DnmDiscovery to execute the DNM Discovery script.
The Proxy Agent screen appears. Fill in the following fields:
4 In the IP Address field, enter the IP address (or network name) of the DEFINITY
Proxy Agent from the PA001 form.
5 In the Read Community field, enter the SNMP read community string of the
DEFINITY Proxy Agent from the PA001 form. The default is public.
6 In the Write Community field, enter the SNMP write community string of the
DEFINITY Proxy Agent from the PA001 form. The default is g3pa.
7 Click Send.
The status line should indicate that the DEFINITY Proxy Agent was successfully
added to the system.
8 Repeat steps 4 though 7 for additional DEFINITY Proxy Agents on the PA001 form.
When all agents have been added, close the window.
Note: PA001 form needs to be updated to include IP addresses for DEFINITY Proxy
Agents and Community Strings.
After executing the above process, it may take several hours (more or less depending on
proxy capacity, network traffic, and the number of managed nodes) before supported
nodes and basic configuration alarm and error data can be collected.