Filter
Top Products
DNM-UNIX Release 4.0 Installation and Getting Started
3 Installing and Upgrading DNM
Upgrading from DNM 3.0 and Later
December 2001
Page 52
Result: The system lists the size of the database and the backup space required. Next,
the system displays a grid that tracks the progress of the task. Next, the
system displays the message below:
Backup has completed successfully
.
15 Then the system displays the message and prompt below:
During installation, the existing database can be
upgraded or it can be removed and a new empty database
created.
Continue with the existing database [yes]?
Execute one of the options (a or b) below:
a To upgrade the existing database, press ENTER
b
To create a new, empty database,
–Type
N (no)
–Press
ENTER
16
Printer Command Prompt. The system displays a message that describes the print
command. Then the system displays the prompt:
Enter Printer Command [lp %file].
On the PA001 form, go to the Network Management System (NMS) section and refer
to the Printer Command field.
At the UNIX prompt, execute one of the options (a or b) from the PA001 form:
a To accept the default printer command, press ENTER