Filter
Top Products
Chapter 4: Using the Web Manager 65
a. Select PDU. The PDU window appears.
b. Click Assign. The Power window appears with a list of all configured PDUs.
c. Select a PDU name from the list of Available PDUs and click Add.
d. (Optional) To configure access to a PDU that has not yet been connected and configured,
specify a PDU name in the Custom - PDU ID field and assign it to the group.
e. Click Save.
7. To authorize the group for power management of selected outlets, perform the following steps.
a. Select Outlets. The Outlets window appears.
b. Click Add. The Add Outlet window appears.
c. Click the Select PDU radio button.
d. Select a PDU from the Connected PDUs menu.
e. Enter the outlet numbers in the Outlet field.
8. (Optional) To authorize management of outlets on a PDU that has not yet been connected and
configured, perform the following steps:
a. Specify a PDU name in the Custom - PDU ID field.
b. Enter the outlet numbers in the Outlet field.
9. Click Save.
To change the PDU password to match a changed password on the PDU:
Perform this procedure only if the password is changed on the PDU. The password configured in
this window is used by the console server software to connect to the PDU.
1. Select Appliance Settings - Ports - Power Profile - Login.
2. Enter the password currently used on the PDU in the password field for the correct type of
PDU.
NOTE: The same password specified in this procedure is used to access all PDUs of the selected PDU model
(Cyclades, SPC or ServerTech).
3. Click Save.
To configure outlet groups:
1. Select Appliance Settings - Ports - Power Profile - Outlet Group.
2. Click Add. The Outlet Group - Add Group window appears.
3. Enter a name for the group in the Group Name field. The name can contain only numbers,
letters, underscore (_) and dash (-) characters. The name should not start with a dash.
4. Click Save. The group name gets added to the Outlet Group list.
5. Click the group name. The Outlet Setting screen appears.
6. Select a PDU and click Add.