Filter
Top Products
Setting Up - NetWare
AXIS 540+/AXIS 560 59
Environments Choose which networking environments you want to configure the Axis
Network Print Server for, e.g. NetWare, TCP/IP, Windows & OS/2 or Macintosh.
If your network comprises various different platforms, you can enable any
combination of environments.
NetWare NDS Place NetWare Print Queues on a specific bindery server, or alternatively into
an NDS Tree.
The IP address Choose the method the Axis Network Print Server should employ for obtaining
an IP address. DHCP, ARP, RARP, BOOTP and Auto-IP are supported. You can
also select to set the IP address manually. Refer to Assign an IP Address to the
Print Server, on page 13 for further information about setting the IP address.
Print Queues The Axis Network Print Server uses the print server name followed by the
printer port as the default Print Queue names and print server port names. If
you want to change the default printer queue names, just type the new names
in the available text fields.
AXIS 540+
Default Print Queue Names and Print Server Port Names
for each of the operating environments.
AXIS 560
Default Print Queue Names and Print Server Port Names
for each operating environment.
Test Page The final user prompt in the Installation Wizard allows you to print a test page
through NetWare. The test page displays the name of all the NetWare servers
the Axis Network Print Server is connected to and shows the status of each
connection.
Unless you want to connect or create additional printing queues, the
installation for the NetWare environment is now completed.
Environment
Default Names
NetWare AXIS1A0003_LPT1_Q
Windows & OS/2 AX1A0003.LP1
AppleTalk AXIS1A0003_LPT1
Environment
Default Names
NetWare
AXIS1A0003_LPT1_Q
AXIS1A0003_LPT2_Q
AXIS1A0003_COM1_Q
Windows & OS/2
AX1A0003.LP1
AX1A0003.LP2
AX1A0003.CM1
AppleTalk
AXIS1A0003_LPT1
AXIS1A0003_LPT2
AXIS1A0003_COM1