Filter
Top Products
Management and Configuration
AXIS 540+/AXIS 560 79
Section 2 Management and Configuration
The management and configuration tools that are supported by the Axis
Network Print Server allow you to:
• Change the print server parameters, i.e. editing the config file
• Receive extended information about the print jobs
•Receive printer port status
• Monitor your printers
• Reset the Axis Network Print Server
Configuration
Overview
The method you should use to manage and configure your Axis Network Print
Server depends on the operating system protocols of your network. The table
below displays which method to use for each supported environment.
Using a Web browser
Once you have established the Axis Network Print Server in the TCP/IP
environment, as described in Assign an IP Address to the Print Server, on page
13, you are free to access the Axis Network Print Server Web pages from any
standard Web browser.
The Web interface of the Axis Network Print Server is divided into two modes of
operation, User mode and Admin mode:
User In User mode, you have no rights to change any parameter settings. However, if
you have access rights to the Admin mode, you can change some of the basic
parameters from User mode via the Configuration Wizard. This mode is
intended for regular users who are only interested in using the print server's
interface for checking print jobs or viewing printer properties. If you want to
change any other of the print server's settings, you must enter the Admin mode.
Operating System Protocols
Configuration/Management methods
IBM Host
(AS/400, IBM Mainframe)
From an IBM Host - See page 94
TCP/IP
(AS/400, IBM Mainframe, UNIX,
Windows
Web Browser - See page 79
AXIS ThinWizard - See page 83
FTP - See page 85
Telnet - See page 87
SNMP - See page 90
IPX/SPX
(NetWare)
Novell Utilities - See page 93
NetBIOS/NetBEUI
Windows
Web Browser - See page 79
AppleTalk
Web browser - See page 79
Mac-FTP - See page 85