Filter
Top Products
NetWare
UNIX
Windows
OS/2
Macintosh
AXIS 5600 User’s Manual Section 9: Management & Configuration
111
Follow the instructions below to use the Parameter List Editor:
1. Choose Edit Parameter List from the Setup menu.
2. Download a config file from a print server or from your hard disk
by selecting from File or from Print Server.
3. Click the Load button and the config file opens in the editor.
4. Edit the config file.
5. Select the appropriate radio button, To File or To Print Server.
6. Click Save after you have made your choice, to save the modified
config file.
Important: ❏ When saving the config file to multiple print servers, make sure
that you do not assign the same IP address to different print
servers.
Modifying the
network
environments
From the Network Environment window you can modify the network
settings for each supported network environment.
To gain access to the Network Environment window, follow the
instructions below:
1. Select the AXIS 5600 from the ‘Network Print Servers’ folder.
2. Click on the Network button on the toolbar or select Network
from the Setup menu.
3. Select the tab corresponding to the environment that you want to
modify.