Filter
Top Products
Windows
AXIS 5600 User’s Manual Section 5: Setting Up - Windows
47
Windows 95 and Windows 98
Installing TCP/IP
Printers in
Windows 95/98
Install the AXIS Print System software on your Windows 95 or
Windows 98 client, if you have not already done so. AXIS Print
System can be downloaded from the AXIS Online CD or from the
Axis WWW home page at http://www.axis.com/.
To enable printing in the TCP/IP environment, you must ensure that
the TCP/IP protocol is enabled on your client.
The set of instructions you should use to install TCP/IP printer ports
is dictated by the IP address of your AXIS 5600:
• If you have an active DHCP server on the network or if you have
already set the IP address of the AXIS 5600 using another
method, you should follow the installation instructions presented
in Installing TCP/IP Printer Ports, on page 49.
• If your AXIS 5600 is not assigned with a valid IP address, you
should follow the installation instructions presented in Installing
TCP/IP Printer Ports and Setting the IP Address, on page 47.
Installing TCP/IP
Printer Ports and
Setting the IP Address
Follow the instructions below to install an AXIS Raw TCP/IP printer
port and set the IP address of the AXIS 5600, using AXIS Print
System:
1. Start AXIS Print System by selecting AXIS Print System from the
Start menu.
2. AXIS Print System starts. Select Search for newly connected print
servers... and click Next>.
3. Read the instructions and click Next>.