Filter
Top Products
NetWare
UNIX
Windows
OS/2
Macintosh
Section 9: Management & Configuration AXIS 5600 User’s Manual
98
Section 9 Management & Configuration
The management and configuration tools that are supported by the
AXIS 5600 allows you to:
• Change the print server parameters, i.e. editing the config file
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Reset the AXIS 5600
• Upgrade the AXIS 5600 firmware (Refer to Section 11 Upgrading
the Software, on page 137)
Configuration
Overview
The method you should use to manage and configure your AXIS 5600
is depending on the operating system protocols of your network. The
table below displays which method to use for each supported
environment.
Operating System Protocols Configuration/Management methods
IPX/SPX
(NetWare)
• AXIS NetPilot - See page 109
• HP JetAdmin - See page 125
• Novell Utilities - See page 128
TCP/IP
(UNIX,
Windows 95/98/NT/2000,
Windows 3.1/WfW,
NetWare Pure IP, OS/2)
• Web Browser - See page 99
• AXIS ThinWizard - See page 105
• FTP - See page 117
• telnet - See page 120
• SNMP - See page 123
• HP Web JetAdmin - See page 125
NetBIOS/NetBEUI
(Windows 95/98/NT/2000,
Windows 3.1/WfW, OS/2)
• AXIS NetPilot - See page 109
AppleTalk • Web browser - See page 99
• Mac-FTP - See page 117
• AXIS NetPilot via a PC platform in the
same network - See page 109