Filter
Top Products
NetWare
Section 4: Setting Up - NetWare AXIS 5600 User’s Manual
34
Section 4 Setting Up - NetWare
This section describes how to continue the installation of the AXIS
5600 in the NetWare environment. Identify which transport protocol
you are running on your network and which installation method you
should use. Continue the installation by selecting the appropriate
installing instructions from the table below:
If you intend to operate your AXIS 5600 in a multi-protocol, mixed
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 5 Setting Up - Windows, on page 44
Section 6 Setting Up - OS/2, on page 70
Section 7 Setting Up - Macintosh, on page 76
Section 8 Setting Up - UNIX, on page 82
Installation
method
Tr a nspor t
protocol
Action
NDPS
TCP/IP
IPX/SPX
See Setup using NDPS, on page 35
Proceed with Installing the AXIS 5600 in NDPS environments, on page 36.
Queue based
printing
IPX/SPX
If you have performed the basic installations as described in Basic Setup
with AXIS NetPilot, on page 21, the AXIS 5600 is already installed for
printing in the NetWare environment.
IPX/SPX
Advanced
configuration
If you need a more advanced installation that is not covered by the AXIS
NetPilot Installation Wizard, continue with Advanced Installation using AXIS
NetPilot, on page 38.
Pure IP
See Basic Queue-based printing (Pure IP), on page 41