Filter
Top Products
NetWare
UNIX
Windows
OS/2
Macintosh
Section 11: Upgrading the Software AXIS 5600 User’s Manual
138
Upgrading the Firmware Software
You can upgrade the AXIS 5600 Flash memory using one of the
following methods:
• AXIS ThinWizard (TCP/IP)
• FTP (TCP/IP)
• AXIS NetPilot Upgrade Wizard (IPX/SPX)
Note: ❏ Updating instructions are also supplied with the software update.
Upgrading using
AXIS ThinWizard
AXIS ThinWizard is a tool that enables batch upgrading of several
print servers and should be used for upgrading the flash memory in
TCP/IP networks.
You must assign the AXIS 5600 with an IP address, as described in
Assigning an IP address, on page 25, before you can use this upgrading
method.
Follow the instructions below to upgrade your print servers using
AXIS ThinWizard:
1. Click the Manage Network button in the AXIS ThinWizard
main menu.
2. Select a network group from the drop-down list. You can only
update the servers that are included in the selected network group.
3. All AXIS servers included in the network group appear. Click the
Firmware button to start the Upgrade Wizard.
4. Follow the instructions that are presented to you to complete the
installation.
Refer to Using AXIS ThinWizard, on page 105, for more information
about AXIS ThinWizard.