Filter
Top Products
UNIX
AXIS 5600 User’s Manual Section 8: Setting Up - UNIX
91
Adding Strings Before
and After Print Jobs
These string functions provide a way to send printer control
commands before and after each print job. They may be specified
individually for each logical printer.
All strings are entered as hexadecimal byte values.
Example: Assume that the logical printer PR5 is configured as a PostScript
printer and that you want to append the PostScript End of File
character (hex
04) after each print job.
Follow the instructions below to add a string after the print job:
1. Select the Printer5 Web page.
2. Enter the string 04 in the String After Print Job text field.
3. Click the Submit Printer5 settings button.
Example: You have a printer with dual input bins, and want to print on pre-
printed forms when using the logical printer PR4. The standard forms
are taken from bin 1, and the pre-printed forms are taken from bin 2.
The string before print job should contain the command to select bin
2,
E
C
l4H (hex 1B 26 6C 34 48), and the string after print job should
contain the command to select bin 1,
E
C
l1H
(hex
1B 26 6C 31 48).
Follow the instructions below to add strings before and after the print
job:
1. Select the Printer4 Web page.
2. Enter the string 1B 26 6C 34 48 in the String Before Print Job
text field.
3. Enter the string 1B 26 6C 31 48 in the String After Print Job
text field.
4. Click the Submit Printer4 settings button.