Filter
Top Products
OS/2
Section 6: Setting Up - OS/2 AXIS 5600 User’s Manual
70
Section 6 Setting Up - OS/2
Having connected the AXIS 5600 to your network, as described in
Connecting a printer to the Ethernet Network, on page 17, this section
now describes how to set up your AXIS 5600 for printing in the OS/2
environment.
Continue with the instructions presented in the table below:
If you intend to operate your AXIS 5600 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 4 Setting Up - NetWare, on page 34
Section 5 Setting Up - Windows, on page 44
Section 7 Setting Up - Macintosh, on page 76
Section 8 Setting Up - UNIX, on page 82
Printing
protocol
See ...
TCP/IP TCP/IP Printing, on page 71
NetBIOS/NetBEUI NetBIOS/NetBEUI Printing, on page 72