Filter
Top Products
NetWare
UNIX
Windows
OS/2
Macintosh
AXIS 5600 User’s Manual Section 3: Basic Installation
27
Registering and
Resolving
Host Names
In order to register the host name of the AXIS 5600 in networks with
dynamic IP address settings, WINS (Windows Internet Name Service)
and DDNS (Dynamic Domain Naming System) are supported. It is
recommended that at least one of these methods should be used if you
are setting the IP address of the AXIS 5600 using DHCP.
The host name of the AXIS 5600 is specified by the PS_NAME
parameter. Refer to B The Parameter List, on page 143
WINS host name rules WINS only supports 15 character long host names. If your host name
is longer than 15 characters, the AXIS 5600 truncates the host name
to 15 characters when registering with a WINS server. You can view
the AXIS 5600 host name that is registered at a WINS server, in the
print server’s Web interface or in AXIS NetPilot. Refer to Section 9
Management & Configuration, on page 98.
DDNS host name rules DDNS supports 53 character long host names, but they can only
consist of the characters ‘A-Z’, ’a-z’ and ‘-’. If your host name consists
of any other characters, they are converted to ‘-’, when registering with
a DDNS server. You can view the AXIS 5600 host name that is
registered at a DDNS server, in the print server’s Web interface or in
AXIS NetPilot. Refer to Section 9 Management & Configuration, on
page 98.
If the host name matches another entry in the DDNS data base, the
AXIS 5600 deletes the entry before registering.
Notes: ❏ The host name limitations conclude that if you want to register
the same host name at a WINS server and a DDNS server, the
host name should be no longer than 15 characters and it should
only contain the characters ‘A - Z’, ‘a-z’ and ‘-’.
❏ Refer to your system manuals or to your network administrator
for instructions on how host name resolutions are performed on
your system.