Filter
Top Products
UNIX
Section 8: Setting Up - UNIX AXIS 5600 User’s Manual
82
Section 8 Setting Up - UNIX
Installation in the UNIX Environment
Having performed the basic TCP/IP setup procedures as defined in
Assigning an IP address, on page 25 and onwards, you are now able to
print in interactive mode using LPR, FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 5600 into your
host spooler, you can use the Axis automatic installation script
axinstall. This utility software is resident on the AXIS 5600 and can be
downloaded to your host using FTP, so no disks are required. The
axinstall script can also be downloaded from the Axis WWW home
page at http://www.axis.com/ and it is available on the AXIS Online
CD.
Having completed this operation, the printer connected to the AXIS
5600 will appear as though they are directly connected to the host
printer spooler.
If you intend to operate your AXIS 5600 in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 4 Setting Up - NetWare, on page 34
Section 5 Setting Up - Windows, on page 44
Section 6 Setting Up - OS/2, on page 70
Section 7 Setting Up - Macintosh, on page 76