Filter
Top Products
NetWare
UNIX
Windows
OS/2
Macintosh
Section 3: Basic Installation AXIS 5600 User’s Manual
28
Using
AXIS IP Installer
Follow the instructions below to set the IP address of your AXIS 5600
using the AXIS IP Installer:
Important! ❏ You should not use AXIS IP Installer to set the IP address of the
AXIS 5600, if you have an active DHCP server in your network.
1. Download the AXIS IP Installer to your host. The software is
available on the AXIS Online CD and on the Axis home page at
http://www.axis.com/.
2. Connect the AXIS 5600 to the network. Note the serial number
that is located on the underside label of the AXIS 5600. You will
need it in the proceedings steps.
3. Start the AXIS IP Installer.
4. Click the serial number of your AXIS 5600 that appears in the
server list.
5. Enter the desired IP address in the designated IP address field and
click the Set IP address button.
6. The IP setting process will take approximately 10 to 40 seconds.
Click OK in the confirmation box that appears when the IP
address has been set.
Notes: ❏ AXIS IP Installer uses the BOOTP and DHCP protocols to
communicate with the AXIS 5600. Make sure that at least one of
these protocols is enabled in your print server.
❏ Restart your AXIS 5600, if it does not show up in the server list.