Filter
Top Products
3. Connections
Max Lamp runtimes for the available projectors.
SIM Projector x(Maxlampruntime,inhours)
BarcoReality SIM6 MKII
1000
Using a lamp for more than its recommended life time is dangerous
as the lamp could explode.
3.3 Switching to standby
Howtoswitchtostandby?
1. Press STANDBY for 2 seconds until the m
essages Saving data please wait is displayed. (image 3-3)
Saving data, please wait
Image 3-3
When switching to standby the projector waits for 30 sec. before it can be restarted. During this period the
LED display will show a jumpin
g square with a dash. After one minute, two dashes will be displayed and the
projector can restart.
3.4 Switching off
How to switch off the projector?
To switch off the projector, handle as follow :
1. Press STANDBY key for 2 seconds. When the message Saving data, please wait is displayed, do not press any longer on the
STANDBY key otherwis
e the projector will restart.
When switching to standby the projector waits for 1 minute before it can restart again. During this period the LED display will
show a jumping square with a dash. After one minute, two dashes will be displayed and the projector can restart.
Warning: Let cool down the proj
ector at least 10 min.
2. Switch off the projector with the power switch.
3.5 Input source connection
3.5.1 Input facilities
Overview input facilities
• 5-cable input
• Computer
• Video (optional)
• S-Video (optional)
• Serial digital input (optional)
• IEEE (not implemented)
Input selection
This can be manually or automatically.
When ’automatic’ is selected in the Input slots menu, by starting up the projector, it searches for an input source by scanning the
inputs one by one. If only one source is found, this source will be projected. If different sources are found, the priority is as follow
R5976493 BARCOREALITY SIM 6 MK II 08092003
15