Filter
Top Products
7. Service Mode
7.12 Panel adjustments
Changing these settings may seriously affect the performance of the projector.
All panel adjustments are factory adjusted. If not really necessary, do not touch any of these adjustments.
They are useful when a new panel is installed.
Start up
1. Push the cursor key ↑ or ↓ to highlight Panel Adjustments (menu 7-27)
2. Press ENTER to select.
The following warning will be displayed : (menu 7-28)
Panel Adjustments is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the panel adjustments.
SERVICE
BARCO LOGO
PANEL ADJUSTMENT
UNIFORMITY
PRESET INPUT BALANCE
ELECTRONIC CONVERGENCE
I2C DIAGNOSIS
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-27
WARNING
PANEL ADJUSTMENTS
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 7-28
7.13 Uniformity
Changing these settings may seriously affect the performance of the projector.
Start up
1. Push the cursor key ↑ or ↓ to highlight Uniformity. (menu 7-29)
2. Press ENTER to select.
The following warning will be displayed : (menu 7-30)
Uniformity is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the uniformity adjustment.
SERVICE
BARCO LOGO
PANEL ADJUSTMENT
UNIFORMITY
PRESET INPUT BALANCE
ELECTRONIC CONVERGENCE
I2C DIAGNOSIS
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-29
WARNING
UNIFORMITY
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 7-30
7.14 Preset Input Balance
Changing these settings may seriously affect the performance of the projector.
R5976493 BARCOREALITY SIM 6 MK II 08092003 81