Filter
Top Products
3. Connections
3.5.6 SDI input / SDI output (optional)
What can be connected ?
Full compatibility with digital Betacam, or digital video sources. This avoids the need for analog processing anywhere in the video
production chain and guarantees the ultimate image quality. An active loop through of the SDI input signal is provided for monitoring
or for double or triple stacking applications.
An active loop through of the SDI input signal is provided for monitoring or for double or triple stacking applications.
How to connect a SDI source ?
1. Connect the out of your SDI source to the BNC SDI input of the projector.
Note: The input is always 70 ohm terminated.
2. If loop through is needed, use the SDI output to connect to next device.
Note: The output impedance of the SDI output is 75 ohm.
How to select slot 5
1. Key in 5 on the RCU or the local keypad.
When a RCVDS05 is connected to the projector, the SDI input is available by keying in 85 on the RCU.
3.6 Communications connections
Overview
• RS232
3.6.1 RS232
Application
1. Remote control :
- easy adjustment of projector via an IBM PC (or compatible) or MAC connection.
- allow storage of multiple projector configurations and set ups.
- wide range of control possibilities.
- address range from 0 to 255.
2. data communications : sending data to the projector or copying the data from the projector to a hard memory device (hard disc,
floppy, etc.).
How to connect ?
1. Connect the serial communication port of computer or Apple Macintosh to the RS232 in port of the projector.
20 R5976493 BARCOREALITY SIM 6 MK II 08092003