Filter
Top Products
7. Service Mode
Start up
1. Push the cursor key ↑ or ↓ to highlight Preset Input Balance. (menu 7-31)
2. Press ENTER to select.
The following warning will be displayed : (menu 7-32)
Uniformity is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the Preset input balance
adjustments.
SERVICE
BARCO LOGO
PANEL ADJUSTMENT
UNIFORMITY
PRESET INPUT BALANCE
ELECTRONIC CONVERGENCE
I2C DIAGNOSIS
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-31
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 7-32
7.15 Electronic convergence
What can be done ?
The electronic convergence allows to correct some convergence errors by shifting horizontally an integral amount of pixels (-3,-2,-
1,0,+1,+2,+3), the adjustment is possible on the three colors.
To avoid color distortion when not necessary leave the electronic convergence settings with a neutral value
for the three colors (+0)
How to adjust the convergence ?
1. Push the cursor key ↑ or ↓ to highlight Electronic convergence. (menu 7-33)
2. Press ENTER to select.
A sliderbox is displayed
Push the cursor key ← or → to adjust the convergence
Push the cursor key ↑ or ↓ to change the color between red, green or blue.
SERVICE
BARCO LOGO
PANEL ADJUSTMENT
UNIFORMITY
PRESET INPUT BALANCE
ELECTRONIC CONVERGENCE
I2C DIAGNOSIS
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-33
7.16 I2C Diagnoses
What can be done?
This menu gives an overview of the correct working of the I²C controlled IC’s.
82
R5976493 BARCOREALITY SIM 6 MK II 08092003