Filter
Top Products
7. Service Mode
7.6.2 Projector Address
How to change the projector address?
1. Push the cursor key ↑ or ↓ to highlight Projector Address. (menu 7-12)
2. Press ENTER to select.
The actual address is filled in.
The first digit is highlighted.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-12
How to enter the new projector address?
1. Enter the digits with the digit keys on the RCU or local keypad.
Or,
push the cursor keys ← or → to select a digit and change the value by pushing the cursor key ↑ or ↓ until the new value is reached.
Continue with the other digits on the same way. The individual address must be between 0 and 255.
7.7 Change Baudrate
Start up
1. Push the cursor key ↑ or ↓ to highlight Chan ge Baudrate PC. (menu 7-13)
2. Press ENTER to display the Change Baudrate PC menu. (menu 7-14)
The actual baudrate will be highlighted.
The following baud rates are available: 115200/57600/38400/19200/9
600/4800/1200
3. Push the cursor key ↑ or ↓ to highlight the desired baudrate.
4. Press ENTER to select.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ.ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-13
CHANGE BAUDRATE PC
115200
57600
38400
19200
9600
4800
1200
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-14
7.8 Reset lamp runtime
When is it allowed?
Reset lamp run time is only allowed when a new lamp is installed.
R5976493 BARCOREALITY SIM 6 MK II 08092003
77