Filter
Top Products
6. Installation Mode
If the “Rugged” option is installed the * key will display a WARNING message.
WARNING
LENS-LOCKING
IS ACTIVATED
ADJUSTING THE LENS
MAY DAMAGE THE
PROJECTOR
PRESS * TO ADJUST
<EXIT> to return
Menu 6-11
Zoom/Focus adjustment of the lens.
1. Push the cursor key ↑ or ↓ to highlight Lens. (menu 6-12)
2. Press ENTER to select.
The adjustment pattern will be displayed.
With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source.
3. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.
Note: The zoom/focus function is only applied when a motorized zoom lens is mounted.
4. When finished, press EXIT to return to the installation menu or press ENTER to go to the shift function.
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
MENU POSITION[CENTER]
QUICK ACCESS KEYS
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-12
Shiftadjustmentofthelens.
1. Push the cursor key ↑ or ↓ to highlight Lens. (menu 6-13)
2. Press ENTER to select.
The adjustment pattern will be displayed.
With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source.
3. Push the cursor key ↑ or ↓ to shift the image up and down and ← or → to shift the image left or right.
Note: The lens can be shifted in a range of :
vertical shift : - 2 mm to + 20 mm
horizontal shift : - 5 mm to + 5 mm
4. When finished, press EXIT to return to the installation menu or press ENTER to go to the zoom/focus function.
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
MENU POSITION[CENTER]
QUICK ACCESS KEYS
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-13
66 R5976493 BARCOREALITY SIM 6 MK II 08092003