Barco RLM-W8 Projector User Manual


  Open as PDF
of 62
 
31
OSD Description
1. PresstheMENUbuttonontheremotecontroloronthebackoftheprojectorto
bringuptheOSDMenu.
2. Youwillseesevenfunctionalmenus(Input,Image,Layout,Lamp,Alignment,
ControlandService).Press◄or►toselectthedesiredsubmenu.
3. Press▲or▼toselectthedesiredsubmenu.
4. Yourcurrentselectionineachofthesubmenuwillbedisplayedinyellowtextand
highlightedinblue.Press◄or►toaccessthecongurationfortheselected
itemorpressENTERtogotoanothersubmenu.
5. PressMENUtoreturntothepreviousmenu.
6. Fromthemainmenu,pressMENUtoclosetheOSDMenu.
INPUT
Input Selection
Usethisfunctiontospecifythesourceofimageconnectedtotherearoftheprojector.For
instance,ifyouhaveconnectedyourPCasthevideoinputsource,
youcanchooseRGBD-15(RGB-HV/SOG)tobetheinputforimageprojection.
Optionsofinputavailableontheprojectorinclude:HDMI1, HDMI2, RGB D-15(RGB-HV/
SOG), YUV1, YUV2(RGBHV/YUV2), Composite Video(Video), S-Video, RGB-S, SDI/
HDSDI/3G.
Input Conguration
ThisfunctionisonlyavailableforinputsourcesRGBD-15,YUV1andRGBHV/YUV2.
OptionsforInputCongurationincludeAuto,YUVHD,YUVSTD,RGB-PCandRGB-Video.
ThedefaultsettingAutoshouldworkformostapplicationsignals.Usethisfunctionto
switchamongYUVHD,YUVSTD,RGB-PCandRGB-Videoiftheinputsignalformatisnot
matchedwiththeAutosetting.
6
OSD Menu description
 previous next