Barco RLM-W8 Projector User Manual


  Open as PDF
of 62
 
50
ScenergiX
ThefunctionofScenergiXisappliedinmultipleprojectorsthatareprojectingatthesame
screensimultaneouslytoadjusttheuniformityoftheimagesonthescreen.
•
Status
PressENTERtoselectONorOFF.ThefunctionmustbesettoONinordertoenablethe
functionofScenergiX.IfthefunctionissettoOFF,thefunctionofScenergiXisdisabled.
•
White Level→whitelevelistosetthelinefromoneprojectorwheretheotherprojector
lastpixelends.Press▼▲◄►toadjustthewhiteleveloftheTop,Bottom.Left,Right
directionontheprojectedimages.
Asshowninthebelowdrawing,theareaDistheoverlapareaoftheprojectedimage1andtheprojectedimage2.The
whitelevellinesthatissetwheretheotherprojectorlastpixelsends.Coloradjustmentformatchingtheimagesis
donewithprojectortoolsetwithcustomscolorspacexandyorwithinputbalanceontheOSD.
•
Black Level→thepurposeofblacklevelisinordertocompensatethenonoverlapzones
vstheoverlapzone.Itincreasetheblackleveltothebrightnessleveloftheoverlapblack.
ItistoadjusttheblackleveloftheTop,Bottom,Left,Rightdirectionontheprojected
images.
Itcanbesettoadjusttheprimarycoloroftheprojector.Forinstance,selectALListo
adjusttheprimarycolorofRed,Greed,andBlue.OritcanbesettoadjusttheRed,Green
andBlueindependently.
Note:ThefunctioncombinationofBlackLeveladjustmentand4Cornersisnotavailable
Note:ThefunctioncombinationofBlackLeveladjustmentandblendalongcornersisnotavailable.
Image 1
Image 2
A B C
D
White Level Lines
Image 1
Image 2
A B C
D
White Level Lines
forblackleveladjustmentablack
imageneedstobeconnectedonthe2
projectors.ZoneBwillhavethesumof
theblacksofthe2projectors.Setthe
adjustmentlineoftheblackleveltothe
positionwherethenonactiveDMD's
oftherightprojectorends.Setthe
adjustmentlineoftheblackleveltothe
positionwherethenonactiveDMD'sof
theleftprojectorends.Adjustblacklevel
ofprojectorAtomatchtheblacklevel
withzoneB.AdjusttheprojectorCto
matchtheblacklevelwithzoneB.
Blend along
corners
•
Reset
ThefunctioncanresettheScenergiXsettingsontheprojector.Itwillrestoretothe
imagestothedefaultthatiswithoutanyScenergiXfunctionsenabled.
•
Adjust Lines
WhenthefunctionisON,therewillbeadjustlinesontheimageinordertoeasilyadjust
multipleimages.Press▼▲◄►ontheremotecontroltoadjustthepositionofthelineson
theimage.
The image below is an example if 2 projectors are projecting at the same image.
1. Horizontallyplacetwoprojectorsandhavethetwoprojectedimageswithan
overlapareaandusethefocus/zoomandlensshiftfunctionswithtestgridpattern
tosetaproperoverlapareaforblendingwithamatchedgridsize.
6
OSD Menu description
 previous next