Barco RLM-W8 Projector User Manual


  Open as PDF
of 62
 
59
LED STATUS
STAND BYERRORON
LED STATUS
STAND BY
Turnsblue Indicatesthattheprojectorisinstandbymode;thisalso
meanstheprojectorhasnotbeenturnedonbypressingthe
SOFTPOWERbuttonbuthasbeenconnectedtopower.
Theindicatorisoff Thisindicatesthattheprojectorhaseitherbeenturnedon
andisworkingnormallyortheprojectorisnotconnectedto
power.
ON
Turnsgreen Thisindicatesthattheprojectorhasbeenturnedonandis
workingnormally.
Flashesingreen Thisindicatesthattheprojectoriscurrentlywarmingupor
coolingdownandwillnotrespondtobuttonoperations.
Theindicatorisoff Thisindicatesthattheprojectoriscurrentlyinstandby
mode.
ERROR
Flashesonceinred Theprojectorlampisfaulty;checktoseeifthelamp
isdamagedorifithasn'tbeenproperlyinstalled.
Flashestwiceinred Thelampcoverisnotproperlyreplaced.
Flashesthreetimesinred Thecoolingfaninsidetheprojectorisnotworking;
seekassistancefromaqualiedservicepersonnel.
Flashesfourtimesinred Theprojectortemperatureistoohigh;trycleaning
theventilatorslotsorunpluggingthepowercordto
resolvetheissue.
Flashesvetimesinred Theprojectorltermightnothavebeeninserted
properly;checktheventilationslotandmakesure
thelterhasbeenproperlyreplacedandinserted.
eulB sutatS
(Standby)
Green
(Power)
Red
( Issue )
1. Standby
2. Lamp is approaching end of life
repeat repeat
3. Cooling / Warm up
4. Power on / Normal
5. Lamp fail repeat
6. Lamp door open repeat
7. Fan fail repeat
8. Over Temperature repeat
9. System Error
Remark: error codes can easily be read out through projector toolset ( rs 232 or ip ) and via web browser.
Remark: The time period of each step in the above LED blinking pattern is 500 milliseconds, e.g.,
for“Cooling / Warm up”state, the green LED will ON for 500 milliseconds, and then OFF 500
milliseconds, and then repeat the above LED pattern.
Simple troubleshooting and denition of the LED indicators
8
 previous next