Barco RLM-W8 Projector User Manual


  Open as PDF
of 62
 
57
Cleaning the filter
Inordertokeeptheinterioroftheprojector
clean,theprojectorisequippedwithalterto
keepoutdustandothersmallparticles.Itis
recommendedthatyoucleantheprojector's
lteraround500hoursofprojectoroperation.
Ifyouareoperatingtheprojectorinadusty
environment,itisrecommendedthatyou
cleantheltermoreoften.
Dustclogsatthelterwillpreventthe
projectorfromdrawingcoolairtolower
theinternaltemperature.Thiscouldlead
tooverheatingandcausetheprojectorto
malfunctionorbecomedamaged.
Use a vacuum cleaner to clean the
ventilation slots.
To clean the lter at the ventilation slots,
refer to the following illustration:
1. Loosenthetwoscrewsonthecover
oftheventilationslot.
Loosen the
2 screws
2. Removethedirtylter;youcanclean
itdirectlyusingwater.Leaveittodry
beforereplacingitforfurtheruse.If
thelterisbroken,purchaseanew
onetoreplaceit.
Take out the filter
and clean it.
3. Insertthecleanlter.
Put the clear filter
inside the cover
4. Reattachtheltercoverandtighten
thetwoscrews.
Close the filter cover
then fasten
the 2 screws
Lamp and lter maintenance
7
 previous next