Filter
Top Products
29
G Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 6 7 8 9 105
MANUALLY CONFIGURING YOUR ROUTER
Setting your Connection Type to Dynamic IP (1483 Bridged)
This connection method bridges your network and ISP’s network
together� The Router will obtain an IP address automatically from your
ISP’s DHCP server�
1. IP Assigned by ISP – Leave “Yes” if your ISP automatically assigns
an IP address� If your ISP assigned a fixed IP address, select “No”
and enter assigned values�
2. VPI/VCI – Enter your VPI and VCI parameter here� These identifiers
are assigned by your ISP�
3. Encapsulation – Select LLC or VC MUX your ISP uses�
Setting your ISP Connection Type to Static IP (IPoA)
This connection type is also called “Classical IP over A
™
” or “CLIP”,
which your ISP provides a fixed IP for your Router to connect to
the Internet�
1. IP Address – Enter an IP address assigned by your ISP for the
Router WAN interface�
2. Subnet Mask – Enter a subnet mask assigned by your ISP�
3. Default Gateway – Enter a default gateway IP address� If the
Router cannot find the destination address within its local network,
it will forward the packets to the default gateway assigned by
your ISP�
4. VPI/VCI – Enter your VPI and VCI parameter here� These identifiers
are assigned by your ISP�
5. Encapsulation – Select LLC or VC MUX (assigned by your ISP)�