Filter
Top Products
58
G Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
MANUALLY CONFIGURING NETWORK ADAPTERS
Windows 98SE or Me
1. Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu�
3. If “Specify an IP address”
is selected, your Router will
need to be set up for a static
IP connection type� Write
the address information
in the table below� You
will need to enter this
information into the Router�
2. Select “TCP/IP -> settings”
for your installed network
adapter� You will see the
following window�
4. Write down the IP address and subnet mask from the “IP
Address” tab (3)�
5. Click the “Gateway” tab (2)� Write down the gateway address in
the chart�
6. Click the “DNS Configuration” tab (1)� Write down the DNS
address(es) in the chart�
7. If not already selected, select “Obtain an IP address automatically”
on the “IP Address” tab� Click “OK”� Restart the computer� When
the computer restarts, your network adapter(s) are now configured
for use with the Router� Set up the computer that is connected to
the cable or DSL modem by FIRST using these steps� You can also
use these steps to add computers to your Router after the Router
has been set up to connect to the Internet�
(1) (2) (3)