Filter
Top Products
45
G Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 6 7 8 9 105
MANUALLY CONFIGURING YOUR ROUTER
Schedule Rule
You may filter Internet access for local clients based on rules� Each
access control rule may be activated at a scheduled time� Define the
schedule on the “Schedule Rule”, and apply the rule on the “Access
Control” page�
Follow these steps to add a schedule:
1. Click “Add Schedule Rule”�
2. You will see the following screen�
3. To configure the schedule rule, specify the name, comment, start
time, and end time that you want to filter on your network�
4. Click “OK” and then “Apply Changes” to save your settings�
5. To complete this configuration, you will need to create or modify
an access rule in the “Client IP filters” section� This activates the
schedule for use in the “Access Control” page�
URL Blocking
To configure the URL-blocking feature, specify the websites (www�
somesite�com) and or keywords you want to filter on your network� Click
“Apply Changes” to activate the change� To complete this configuration,
you will need to create or modify an access rule in the “Client IP filters”
section� To modify an existing rule, click the “Edit” option next to the
rule you want to modify� To create a new rule, click on the “Add PC”
option� From the “Access Control > Add PC” section, check the option
for “WWW with URL Blocking” in the “Client PC Service” table to filter
out the websites and keywords specified�