Filter
Top Products
75
G Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 6 7 9 108
TROUBLESHOOTING
Enabling WPA-PSK (no server)
1. Under Windows XP, click “Start > Control Panel >
Network Connections”�
2. Right-clicking on the “Wireless Networks” tab will display the
following screen� Ensure the “Use Windows to configure my
wireless network settings” box is checked�
3. Under the “Wireless Networks” tab, click the “Configure” button�
4. For a home or small business user, select “WPA-PSK” under
“Network Administration”�
Note: Select WPA (with radius server) if you are using this computer to
connect to a corporate network that supports an authentication server
such as a radius server� Please consult your network administrator for
further information�
5. Select “TKIP” or “AES” under “Date Encryption”� This setting will
have to be identical to the wireless router or access point that you
set up�
6. Type in your encryption key in the “Network Key” box�
IMPORTANT: Enter your PSK� This can be from eight to 63
characters and can be letters, numbers, or symbols� This same key
must be used on all of the clients that you set up�
7. Click “OK” to apply settings�