Filter
Top Products
61
G Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
MANUALLY CONFIGURING NETWORK ADAPTERS
4. Select the “TCP/IP” tab (3)� Next to “Configure” (4), you should see
“Manually” or “Using DHCP”� If you do not, check the PPPoE tab
(5) to make sure that “Connect using PPPoE” is NOT selected� If it
is, you will need to configure your Router for a PPPoE connection
type using your user name and password�
6. If not already selected, select “Using DHCP” next to “Configure”
(4), then click “Apply Now”�
5. If “Manually” is selected,
your Router will need to
be set up for a static IP
connection type� Write the
address information in the
table below� You will need
to enter this information into
the Router�
Your network adapter(s) are now configured for use with the Router�