Filter
Top Products
41
G Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 6 7 8 9 105
MANUALLY CONFIGURING YOUR ROUTER
6. You will see the Router’s user interface in the browser window�
Click “Wireless Bridge” (2) on the left-hand side of the screen� You
will see the following screen�
7. Check the box that says, “Enable ONLY specific Access Points
to connect” (1)�
8. In the field named “AP1” (3), type in the MAC address of your
secondary access point� When you have typed in the address,
click “Apply Changes”�
9. Bridging is now set up�
Note: It may take up to a minute for the bridged connection to properly
establish itself� In some cases, it may be necessary to restart the access
point and the Router to initiate the bridge�
(1)
(3)
(2)