Billion Electric Company BiGuard 50G Network Card User Manual


 
129
Any Local Address: Will enable any local address on the network.
Subnet: The subnet of the remote network. Selecting this option allows
you to enter an IP address and netmask.
IP Range: The IP Range of the remote network.
Single Address: The IP address of the remote host.
Gateway Address: The gateway address of the remote host.
Proposal:
Secure Association (SA): SA is a method of establishing a security policy
between two points. There are three methods of creating SA, each varying in
degrees of security and speed of negotiation:
Main Mode: Uses the automated Internet Key Exchange (IKE) setup; most
secure method with the highest level of security.
Aggressive Mode: Uses the automated Internet Key Exchange (IKE) setup;
mid-level security. Speed is faster than Main mode.
Manual Key: Standard level of security. It is the fastest of the three
methods.
Method: There are two methods of checking the authentication information, AH
(Authentication Header) and ESP (Encapsulating Security Payload). Use ESP for
greater security so that data will be encrypted and authenticated. AH data will be
authenticated but not encrypted.
Encryption Protocol: Select the encryption method from the pull-down menu.
There are several options: DES, 3DES, and AES (128, 192 and 256). 3DES and AES
are more powerful but increase latency.
DES: Stands for Data Encryption Standard. It uses a 56-bit encryption
method.
3DES: Stands for Triple Data Encryption Standard. It uses a 168-bit
encryption method.
AES: Stands for Advanced Encryption Standard. You can use 128, 192 or
256 bits as encryption method.
Authentication Protocol: Authentication establishes data integrity and ensures
it is not tampered with while in transit. There are two options: Message Digest 5
(MD5), and Secure Hash Algorithm (SHA1). While slower, SHA1 is more resistant to
brute-force attacks than MD5.
MD5: A one-way hashing algorithm that produces a 128bit hash.
SHA1: A one-way hashing algorithm that produces a 160bit hash.
Perfect Forward Secure: Choose whether to enable PFS using Diffie-Hellman
public-key cryptography to change encryption keys during the second phase of VPN
negotiation. This function will provide better security, but extends the VPN