Filter
Top Products
159
If an IP address can be obtained, but your PC cannot load any web pages from the
Internet:
- Your PC may not recognize DNS server addresses. Configure your PC manually
with DNS addresses.
- Your PC may not have the router correctly configured as its TCP/IP gateway.
5.5 Problems with Date and Time
If the date and time is not being displayed correctly, be sure to set it for your
BiGuard 50G via the Web Configuration Interface. Both date and time can be found
under Configuration > System > Time Zone.
5.6 Restoring Factory Defaults
You can restore your BiGuard 50G to its factory settings by holding the Reset button
on the back of your router until the Status LED begins to blink. This will reset your
router to its default settings.