Billion Electric Company BiGuard 50G Network Card User Manual


 
86
of the connected AP. WDS takes advantages of cost saving and flexibility which no
extra wireless client device is required to bridge between two access points and
extending an existing wired or wireless infrastructure network to create a larger
network.
In addition, WDS enhances its link connection security in WEP mode, WEP key
encryption must be the same for both access points.
WDS Service: The default setting is Disable. Check Enable radio button to
activate this function.
1. Peer WDS MAC Address: It is the associated AP’s MAC Address. It is important
that your peer’s AP must include your MAC address in order to acknowledge and
communicate with each other.
2. Peer WDS MAC Address: It is the second associated AP’s MAC Address.
3. Peer WDS MAC Address: It is the third associated AP’s MAC Address.
4. Peer WDS MAC Address: It is the fourth associated AP’s MAC Address.
Note: For MAC Address, Semicolon ( : ) or Dash (-) must be included.
4.4.1.2 Wireless Security
You can disable or enable with WPA or WEP for protecting wireless network. The
default mode of wireless security is disabled.
WPA Pre-Shared Key
WPA Algorithms: TKIP (Temporal Key Integrity Protocol) / AES(Advanced