Filter
Top Products
135
Interface: The current traffic type. This can be WAN1 (outbound, inbound) and
WAN2 (outbound, inbound).
Application: User defined application name for the current rule.
Guaranteed: The guaranteed amount of bandwidth for this rule as a percentage.
Maximum: The maximum amount of bandwidth for this rule as a percentage.
Priority: The priority assigned to this service. Select a value from 0 to 6, 0 being
highest.
DSCP Marking: Used to classify traffic. Select from Best Effort, Premium, Gold
Service (High Medium, Low), Silver (H,M,L), and Bronze (H,M,L).
Address Type: The type of address this rule applies to. Select IP Address or MAC
Address.
Bandwidth Type:
Shared Bandwidth: Please select Shared Bandwidth if you would like the specified
bandwidth to be shared for all IP address in specified IP range.
Bandwidth per source IP Address: Please select Bandwidth per source IP
Address if you would like the specified bandwidth to be applied individually per
source IP address in specified IP range.
For IP Address:
Source IP Address Range: The range of source IP Addresses this rule applies to.
Destination IP Address Range: The range of destination IP Addresses this rule
applies to.
Source Port Range: The range of source ports this rule applies to.
Destination Port Range: The range of destination ports this rule applies to.
Helper: You could also select the application type you would like to apply for
automatic input.
DSCP: DSCP matching is used to identify traffic for the rule. This option will only be
applied to the packets whose DSCP filed’s IP header matches the criteria selected
from the drop-down menu.
Schedule: Allows you select a time for this QoS policy to be applied to. This option
allows Admin to easily control the QoS of a particular user using a particular IP by
using several Schedule events for the different parts of the day. (Look for Chapter
4.4.9.4 Schedule on how to create a new schedule)
Candidate: Clicking on Candidate will present you with a pop-up window of the
available Schedule policies set.
Click Apply to save your changes.