Filter
Top Products
Page 103
724-746-5500 | blackbox.com
Chapter 4: Configuration
4.5.3 User Macros
In this menu, you can create macro commands for switching, disconnection, or
user administration. The macro commands are created for each user separately.
A macro can execute up to 16 switching commands successively.
You will use hotkeys and the function keys <F1>-<F16> to execute the
macros.
NOTE: To execute user macros, the user has to be logged in at the matrix.
You can select between the following settings:
Table 4-27. Settings.
Field Selection Description
Function (01–06)
Connect,
(P1 = CON, P2 = CPU)
Set bidirectional connection from console P1 to CPU P2.
Connect Video,
(P1 = CON, P2 = CPU)
Set video connection from console P1 to CPU P2.
Disconnect (P1=CON) Disconnect console P1.
Logout User Logout current user.
Set Real CPU
(P1 = VCPU, P2 = RCPU)
Assign a virtual CPU to a real CPU.
Set Virtual CON
(P1 = RCON, P2 = VCON)
Assign a real console to a virtual console.
Push (P1 = CON)
The individual KVM connection is forwarded to console P1 and is
changed to a video-only connection.
Push Video (P1 = CON)
The video signal of the current connection (KVM or video only) is
forwarded to console P1. The individual connection remains
unchanged (KVM or video only).
Get (P1 = CON)
The individual console gets a video-only connection to the CPU that os
currently connected to console P1. The connection of console P1
remains unchanged (KVM or video only).
P1 CON or CPU Device Name of CON or CPU device.
P2 CPU or CON Device Name of CON or CPU device.