Filter
Top Products
2 Bradyprinter 200M-e and 200M-e 300 User’s Guide
6WRUDJH
If you are not placing the printer into operation immediately, repackage it
using the original packing materials. The printer may be stored under the
following conditions:
• Temperature: –4° to +140° F (–20° to +60° C)
• Relative humidity: 5% to 85% non-condensing
0HGLDDQG5LEERQ5HTXLUHPHQWV
Since print quality is affected by media and ribbon, printing speeds, and
printer operating modes, it is very important to run tests for your
applications.
We STRONGLY RECOMMEND the use of Brady-brand supplies for
continuous high-quality printing. A wide range of paper, polypropylene,
polyester, and vinyl stock has been specifically engineered to enhance the
printing capabilities of the printer and to ensure against premature
printhead wear.
• Continuous roll media, fanfold media, or card stock with optional
perforations and registration holes may be used.
• Printhead life may be reduced by the abrasion of exposed paper fibers
when using perforated media.
• The ribbon MUST be as wide as or wider than the media being used. If
the ribbon is narrower than the media, areas of the printhead are
unprotected and subject to premature wear. (When printing in direct
thermal mode, ribbon is not used and should not be loaded in the
printer.)