Filter
Top Products
Bradyprinter 200M-e and 200M-e 300 User’s Guide 63
/ØÏlÍAÃlÍAcÍcØÆÏlÏ
&OHDQLQJ
Table 2 provides a brief cleaning schedule. Specific cleaning procedures
are provided on the following pages.
CAUTION: Use only the cleaning agents indicated. Brady
Corporation will not be responsible for any other fluids being
used on this printer.
Table 2
Area Method Interval
Printhead Solvent* Direct thermal print mode:
After every roll of media (or
500’/152 m of fanfold media).
Thermal transfer print mode:
After every roll of ribbon.
Platen roller Solvent*
Transmissive sensor Air blow
Black mark sensor Air blow
Media path Solvent*
Ribbon sensor Air blow
Label available sensors Air blow Monthly
Tear-off/peel-off bar Solvent*
As needed
Snap plate Solvent*
Cutter Solvent*
* Brady recommends using a solvent containing 90% isopropyl alcohol.